Solo mining - Problem
-
- Posts: 16
- Joined: Mon Jun 20, 2011 5:15 pm
Solo mining - Problem
Hello,
I´m mining at a pool.
poclbm -d 0 --user namecoinstringoradress --pass password --host host --port port VECTORS BFI_INT AGGRESSION=10 WORKSIZE=128 DEVICE=0 FASTLOOP=80
WORKS!!!
Usage for poolmining(here is a problem too,but I can´t see my fail...):
phoenix.exe -k poclbm DEVICE=0 USER=namecoinstringoradress PASS=password -u http://host PORT=port
(Problems communicating with bitcoin RPC)
WORKS NOT!!! Why?
How it works with solo mining? Does anyone could post me the order how to mine solo?
I try some orders but I always get an error (Problems communicating with bitcoin RPC)
Aditional-bitcoin.conf-settings:
#allowreceivebyip=1 (not activated)
keypool=100
gen=1
rpcconnect=127.0.0.1
rpcport=9332
rpcuser=user
rpcpassword=userspw
daemon=1
I think the entered order for the host or/and port is/are wrong - Wich are the right one?
I used "localhost" and "127.0.0.1" and port 8332 and 9332 - Nothing have worked.
Thanks.
I´m mining at a pool.
poclbm -d 0 --user namecoinstringoradress --pass password --host host --port port VECTORS BFI_INT AGGRESSION=10 WORKSIZE=128 DEVICE=0 FASTLOOP=80
WORKS!!!
Usage for poolmining(here is a problem too,but I can´t see my fail...):
phoenix.exe -k poclbm DEVICE=0 USER=namecoinstringoradress PASS=password -u http://host PORT=port
(Problems communicating with bitcoin RPC)
WORKS NOT!!! Why?
How it works with solo mining? Does anyone could post me the order how to mine solo?
I try some orders but I always get an error (Problems communicating with bitcoin RPC)
Aditional-bitcoin.conf-settings:
#allowreceivebyip=1 (not activated)
keypool=100
gen=1
rpcconnect=127.0.0.1
rpcport=9332
rpcuser=user
rpcpassword=userspw
daemon=1
I think the entered order for the host or/and port is/are wrong - Wich are the right one?
I used "localhost" and "127.0.0.1" and port 8332 and 9332 - Nothing have worked.
Thanks.
Re: Solo mining - Problem
Port number can be configured in the config file.
ex :
ex :
Code: Select all
rpcport=8336
server=1
NamecoinID: id/khal
GPG : 9CC5B92E965D69A9
NMC: N1KHAL5C1CRzy58NdJwp1tbLze3XrkFxx9
BTC: 1KHAL8bUjnkMRMg9yd2dNrYnJgZGH8Nj6T
Register Namecoin domains with BTC
My bitcoin Identity - Send messages to bitcoin users
Charity Ad - Make a good deed without paying a cent
GPG : 9CC5B92E965D69A9
NMC: N1KHAL5C1CRzy58NdJwp1tbLze3XrkFxx9
BTC: 1KHAL8bUjnkMRMg9yd2dNrYnJgZGH8Nj6T
Register Namecoin domains with BTC
My bitcoin Identity - Send messages to bitcoin users
Charity Ad - Make a good deed without paying a cent
-
- Posts: 16
- Joined: Mon Jun 20, 2011 5:15 pm
Re: Solo mining - Problem
Great support,
while working hard supporting people.
Works - Thanks.
One last thing, I would like to start it with phoenix but I always get an error...:
phoenix.exe -k poclbm DEVICE=0 USER=user PASS=userspw -u http://127.0.0.1 PORT=9336 VECTORS BFI_INT AGGRESSION=10 WORKSIZE=128 DEVICE=0 FASTLOOP=60
[21/06/2011 21:04:21] Phoenix 1.48 starting...
[0 Khash/sec] [0 Accepted] [0 Rejected]
[21/06/2011 21:04:23] Failed to connect, retrying...
[0 Khash/sec] [0 Accepted] [0 Rejected] [RPC]
Also I tried it with "localhost". What´s wrong?
while working hard supporting people.
Works - Thanks.
One last thing, I would like to start it with phoenix but I always get an error...:
phoenix.exe -k poclbm DEVICE=0 USER=user PASS=userspw -u http://127.0.0.1 PORT=9336 VECTORS BFI_INT AGGRESSION=10 WORKSIZE=128 DEVICE=0 FASTLOOP=60
[21/06/2011 21:04:21] Phoenix 1.48 starting...
[0 Khash/sec] [0 Accepted] [0 Rejected]
[21/06/2011 21:04:23] Failed to connect, retrying...
[0 Khash/sec] [0 Accepted] [0 Rejected] [RPC]
Also I tried it with "localhost". What´s wrong?
Re: Solo mining - Problem
You're welcome... for donation :pnc-or-btc... wrote:Great support,
while working hard supporting people.
Works - Thanks.
This syntax is displayed on the bitparking pool, give it a try :
phoenix.exe -u http://user:pass@127.0.0.1:9336/ -k poclbm VECTORS BFI_INT AGGRESSION=10 WORKSIZE=128 DEVICE=0 FASTLOOP=false
NamecoinID: id/khal
GPG : 9CC5B92E965D69A9
NMC: N1KHAL5C1CRzy58NdJwp1tbLze3XrkFxx9
BTC: 1KHAL8bUjnkMRMg9yd2dNrYnJgZGH8Nj6T
Register Namecoin domains with BTC
My bitcoin Identity - Send messages to bitcoin users
Charity Ad - Make a good deed without paying a cent
GPG : 9CC5B92E965D69A9
NMC: N1KHAL5C1CRzy58NdJwp1tbLze3XrkFxx9
BTC: 1KHAL8bUjnkMRMg9yd2dNrYnJgZGH8Nj6T
Register Namecoin domains with BTC
My bitcoin Identity - Send messages to bitcoin users
Charity Ad - Make a good deed without paying a cent
-
- Posts: 16
- Joined: Mon Jun 20, 2011 5:15 pm
Re: Solo mining - Problem
You needn't worry - Sure, if there´s a little bitkhal wrote:You're welcome... for donation :p
Code: Select all
phoenix.exe -u http://user:pass@127.0.0.1:9336/ -k poclbm VECTORS BFI_INT AGGRESSION=10 WORKSIZE=128 DEVICE=0 FASTLOOP=false
Re: Solo mining - Problem
Be sure to use the right port value. 8336 or 9336 ? Use the same as the one in the config file (if solo mining). And restart namecoin if you have changed the config. I don't see another thing that could help you for now...
NamecoinID: id/khal
GPG : 9CC5B92E965D69A9
NMC: N1KHAL5C1CRzy58NdJwp1tbLze3XrkFxx9
BTC: 1KHAL8bUjnkMRMg9yd2dNrYnJgZGH8Nj6T
Register Namecoin domains with BTC
My bitcoin Identity - Send messages to bitcoin users
Charity Ad - Make a good deed without paying a cent
GPG : 9CC5B92E965D69A9
NMC: N1KHAL5C1CRzy58NdJwp1tbLze3XrkFxx9
BTC: 1KHAL8bUjnkMRMg9yd2dNrYnJgZGH8Nj6T
Register Namecoin domains with BTC
My bitcoin Identity - Send messages to bitcoin users
Charity Ad - Make a good deed without paying a cent
-
- Posts: 16
- Joined: Mon Jun 20, 2011 5:15 pm
Re: Solo mining - Problem
I am sure.
It´s anything with the pw, that means with the syntax.
Or works it for you... You using linux right?
You´re sure this is the right syntax?
It´s anything with the pw, that means with the syntax.
Or works it for you... You using linux right?
You´re sure this is the right syntax?
Re: Solo mining - Problem
Yes, linux (look under my nick :p)
And i'm sure of nothing because i've an intel GPU :p
Do not use the same rpcport as bitcoin.
Check rpcuser, rpcpassword, rpcport values (and name : it's easy to type rcp instad of rpc)
And i'm sure of nothing because i've an intel GPU :p
Do not use the same rpcport as bitcoin.
Check rpcuser, rpcpassword, rpcport values (and name : it's easy to type rcp instad of rpc)
NamecoinID: id/khal
GPG : 9CC5B92E965D69A9
NMC: N1KHAL5C1CRzy58NdJwp1tbLze3XrkFxx9
BTC: 1KHAL8bUjnkMRMg9yd2dNrYnJgZGH8Nj6T
Register Namecoin domains with BTC
My bitcoin Identity - Send messages to bitcoin users
Charity Ad - Make a good deed without paying a cent
GPG : 9CC5B92E965D69A9
NMC: N1KHAL5C1CRzy58NdJwp1tbLze3XrkFxx9
BTC: 1KHAL8bUjnkMRMg9yd2dNrYnJgZGH8Nj6T
Register Namecoin domains with BTC
My bitcoin Identity - Send messages to bitcoin users
Charity Ad - Make a good deed without paying a cent
-
- Posts: 16
- Joined: Mon Jun 20, 2011 5:15 pm
Re: Solo mining - Problem
It´s won´t run...
It´s a syntax-err with the password.
It´s a syntax-err with the password.