Hi,
1. My Internet connection upload is about 512 kbps (EuroDOCSIS 2.0 network) so the NMC client connected to 60 other nodes is exhausting it completely. What can I do to let it use no more than 100 kbps when its up and running.
2. How can i download an RFC1035 compatible zone of bit TLD from the client? I want to start my own DNS server.
Thanks in advance
Connections limit and list of .bit domains in RFC1035 style
-
- Posts: 309
- Joined: Tue Jul 19, 2011 9:33 pm
Re: Connections limit and list of .bit domains in RFC1035 st
in config file you can use something like maxconnetions=8 (i think is that?)akurczyk wrote:Hi,
1. My Internet connection upload is about 512 kbps (EuroDOCSIS 2.0 network) so the NMC client connected to 60 other nodes is exhausting it completely. What can I do to let it use no more than 100 kbps when its up and running.
2. How can i download an RFC1035 compatible zone of bit TLD from the client? I want to start my own DNS server.
Thanks in advance
or need some other throttling software (or maybe can do some qos on router)?
-
- Posts: 2001
- Joined: Tue Jun 05, 2012 6:25 am
- os: linux
Re: Connections limit and list of .bit domains in RFC1035 st
Not sure about #2, but if you want to start a DNS server, you might try looking at either nmcontrol or namecointobind.akurczyk wrote:Hi,
1. My Internet connection upload is about 512 kbps (EuroDOCSIS 2.0 network) so the NMC client connected to 60 other nodes is exhausting it completely. What can I do to let it use no more than 100 kbps when its up and running.
2. How can i download an RFC1035 compatible zone of bit TLD from the client? I want to start my own DNS server.
Thanks in advance
Re: Connections limit and list of .bit domains in RFC1035 st
Thanks
1. Where do I have to save this file? On Linux it's located in ~/.namecoind/namecoind.conf.
2. I started this server using NamecoinToBind PHP script It has some errors but it works. The address is: akurczyk.nazwa.pl.
1. Where do I have to save this file? On Linux it's located in ~/.namecoind/namecoind.conf.
2. I started this server using NamecoinToBind PHP script It has some errors but it works. The address is: akurczyk.nazwa.pl.
-
- Posts: 309
- Joined: Tue Jul 19, 2011 9:33 pm
Re: Connections limit and list of .bit domains in RFC1035 st
on Linux it should be ~/.namecoin/namecoin.confakurczyk wrote:Thanks
1. Where do I have to save this file? On Linux it's located in ~/.namecoind/namecoind.conf.
2. I started this server using NamecoinToBind PHP script It has some errors but it works. The address is: akurczyk.nazwa.pl.
not namecoind